About Us Contact Us Shipping Easy Returns Privacy Policy Terms of Service
Skip to content
Attic Lift 20.75" X 44" & 28.75" X 56" 400LBS Automatic Lift With Easy-Use Remote Control For Storage Organization

Attic Lift 20.75" X 44" & 28.75" X 56" 400LBS Automatic Lift With Easy-Use Remote Control For Storage Organization

by Auxx Lift
$2,330.00
Dimensions

Notify me when back in stock

It's the best value on the market! - Load up to 400 LBS! Easily store items in your attic at the push of a button. Our motorized lifting platform maximizes the storage potential of your entire house. 

  • Built in the USA 🦅
  • EASY INSTALL! Includes hardware for a sealing cover
  • Remote control included
  • Steel aircraft cables (Lift tested to UL standards)
  • No obstructing posts/rails in the attic like conventional attic lifts
  • NEW: Includes frame to seal the ceiling - Fully adjustable to accommodate all joist sizes from 2×4 to 2×16 or TJIs.
  • Platform size: 20.75 in x 44 in
  • Ceiling Cutout Size: 22.5 in x 46.5 in

 

Heavy Duty Storage Solution
Features & Benefits

Decking
The Attic-Lift is sheathed with a beautiful 3/4 in thick Oak veneered plywood sheet (5-ply).

No heavy lifting
Eliminate the safety hazard of carrying heavy items up and down the pull-down stairways. Our DIY attic lift system lets your bulkiest items vanish from your garage floor and be safely stored in your attic.

Wireless Remote-Control
This attic hoist is equipped with an easy-to-use remote control that allows you to lower/raise your items. Programmable stopping points allow you to set high and low point parameters that prevent your items from hitting the floor.

Safety
The robust attic lift system comes with a wide variety of safety features:

  • Self-leveling platform: The controller monitors and adjusts cable speeds to keep the platform level.
  • Stop Limit: The Attic-Lift monitors the weight on the lift, preventing you from overloading it.

Custom Platform Sizes
In addition to our two standard sizes, 20.75" x 44" and 28.75" x 56", we offer custom platform sizes upon request.

 

Platform Frame

The platform frame is constructed with a versatile T-slotted framing rail made from 6105-T5 aluminum alloy. The long sides use 2 x 1 solid double T-slots, and the short sides use 1 x 1 solid T-slotted beams.

Material: 6105-T5 Aluminum
Finish: Anodized Silver
Tensile Strength: 35,000 psi

             Double Solid T-slot Beam 

 

 

Powerful motors


To ensure the platform stays level, the Attic-Lift uses two tubular motors synced via the control unit. Both motors are mounted on steel strut channels which are anchors via lag screws on your attic's floor joists/rafters.

Motors
The Attic-Lift runs on a typical 100- 120V AC household, drawing 2.3 amps.

Aircraft Cables
Four hot-dipped galvanized 7x19 steel cables, each made from 133 wires, hoist the attic storage system. The cables are wrapped in a vinyl coating that not only protects your hands but also seals in any lubrication, increasing their useful life.

Vertical Travel Distance
We offer three versions of this attic elevator, allowing for 13ft, 16ft, and 18ft vertical travel distances, respectively.

 

Description

It's the best value on the market! - Load up to 400 LBS! Easily store items in your attic at the push of a button. Our motorized lifting platform maximizes the storage potential of your entire house. 

  • Built in the USA 🦅
  • EASY INSTALL! Includes hardware for a sealing cover
  • Remote control included
  • Steel aircraft cables (Lift tested to UL standards)
  • No obstructing posts/rails in the attic like conventional attic lifts
  • NEW: Includes frame to seal the ceiling - Fully adjustable to accommodate all joist sizes from 2×4 to 2×16 or TJIs.
  • Platform size: 20.75 in x 44 in
  • Ceiling Cutout Size: 22.5 in x 46.5 in

 

Heavy Duty Storage Solution
Features & Benefits

Decking
The Attic-Lift is sheathed with a beautiful 3/4 in thick Oak veneered plywood sheet (5-ply).

No heavy lifting
Eliminate the safety hazard of carrying heavy items up and down the pull-down stairways. Our DIY attic lift system lets your bulkiest items vanish from your garage floor and be safely stored in your attic.

Wireless Remote-Control
This attic hoist is equipped with an easy-to-use remote control that allows you to lower/raise your items. Programmable stopping points allow you to set high and low point parameters that prevent your items from hitting the floor.

Safety
The robust attic lift system comes with a wide variety of safety features:

  • Self-leveling platform: The controller monitors and adjusts cable speeds to keep the platform level.
  • Stop Limit: The Attic-Lift monitors the weight on the lift, preventing you from overloading it.

Custom Platform Sizes
In addition to our two standard sizes, 20.75" x 44" and 28.75" x 56", we offer custom platform sizes upon request.

 

Platform Frame

The platform frame is constructed with a versatile T-slotted framing rail made from 6105-T5 aluminum alloy. The long sides use 2 x 1 solid double T-slots, and the short sides use 1 x 1 solid T-slotted beams.

Material: 6105-T5 Aluminum
Finish: Anodized Silver
Tensile Strength: 35,000 psi

             Double Solid T-slot Beam 

 

 

Powerful motors


To ensure the platform stays level, the Attic-Lift uses two tubular motors synced via the control unit. Both motors are mounted on steel strut channels which are anchors via lag screws on your attic's floor joists/rafters.

Motors
The Attic-Lift runs on a typical 100- 120V AC household, drawing 2.3 amps.

Aircraft Cables
Four hot-dipped galvanized 7x19 steel cables, each made from 133 wires, hoist the attic storage system. The cables are wrapped in a vinyl coating that not only protects your hands but also seals in any lubrication, increasing their useful life.

Vertical Travel Distance
We offer three versions of this attic elevator, allowing for 13ft, 16ft, and 18ft vertical travel distances, respectively.

 

Shipping is FREE on all orders over $100 to customers within the U.S.

We don't want to mess around with fine print and extra charges, we like things to be simple and easy.

Want to know about our Returns Policy? Read more here.


Order Confirmation:
As soon as you place your order you will receive an order confirmation e-mail. This means that we have received your order in our system and pre-authorized your credit card for the purchase.

As soon as we receive your order we automatically check to confirm that your order is in stock and available for immediate shipment. If your item is on back-order or unavailable we will void the pre-authorization and reach out to you via e-mail to see if alternate arrangements can be made.

If your item(s) are available for immediate shipment (within 5 business days) we will process the charges and get to work preparing your order for shipment.

Order Shipment:
If your order is in stock and we process the charges to your credit card it will ship within three business days from the date of your order.

We will send you shipping confirmation within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.

If you do not receive shipping confirmation from us within four business days of your order feel free to follow up with us at support@hammeredgaragebox.com.

International Orders:
Please be aware that our products are made specifically for the United States of America market. This means that they require a 110V electrical system to function correctly.

Our products have generally not been certified for use with other countries electrical safety standards but all of our products are certified to [country of sale] standards.

We will happily ship our fantastic products to international customers. Due to the extremely wide variety of product dimensions we will provide an up to date shipping price quote for you on request.

If you are happy with our shipping quote we will prepare an order and payment though our ultra secure online payment gateway.

Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery or do not agree to accept the delivery.

If you do accept delivery you are required to immediately take photos using your smart phone or camera of the damaged packaging or products inside the packaging.

If your item(s) do arrived damaged please send photos to [email address], then visit our Returns page and lodge your return claim online.

We get it. You've got a lot of choice when it comes to online retailers. Here's why we think you should shop with us at Hammered Garage Box.

  • Free Shipping USA wide. No extra charges. Ever.
  • Price Match Guarantee. Best prices online guaranteed.
  • 30 Day Easy Returns. No happy with your product, we'll take it back no questions asked.
  • Great Service. We pride ourselves on the best service, anywhere.
  • Your Satisfaction Guaranteed. We handpick our products for quality, we know you'll love them. But is there is ever something wrong, we'll fix it.
  • American owned and operated business